Printer Customer Support Number

HP printer Scanner Error 22 is an indication of the snag which gets displayed on the control panel of the printer when the users are trying to scan a document. This usually happens when an exceeded amount of pressure is applied to the scanner, or it has been given more load. When the scanning glass cannot take the load more than its limit, the control panel shows the particular error. This kind of malfunction occurs in HP LaserJet Pro Printers, even though they are highly efficient devices. If you also own a LaserJet Pro and have come across this error, then you can easily get in touch with  Printer Customer care and have a word with the techies or can try manual maintenance diagnosis by implementing the steps given in this blog.

There are different ways by which you can resolve the HP LaserJet Pro Scanner Error 22, and the steps have been discussed one by one below

1^st step- Switch on the printer

Connect your HP printer to the main power source and press the power button on the printer till the light begins to blink

2^nd step- Verify if your printer is in idle state

Wait for a few minutes till the time you come to know that whether your printer is in idle state or silent. If it is, then you must disconnect the printer once.

3^rd step- Unplug the printer from the power source

After completing the 2^nd step, you must now unplug the printer from the main power source. Let it rest for a minute.

4^th step- Plug the printer back

After that, connect the printer to the main power source, and once you do that, the printer will switch on automatically. If it doesn’t, then press the power button on the printer to manually switch it on.

5^th step-Warm up

The printer will now enter the warm-up phase. During that the lights will start flashing and the printer carriage will move. Wait till the task is finished

6^th step-Connect with HP LaserJet Customer Support

If the issue doesn’t get resolved by trying the basic troubleshooting methods, then, you can get in touch with Printer Customer Support and avail technical assistance. You are also advised to see that the scanner is not applied with extra pressur, and you do not put huge amount of documents to scan at once. Taking precautions from your side will also help to avoid the error in the future.

Source Url -: https://www.printersrepairservice.com/fix-hp-laserjet-pro-printers-...