Camping and caravanning enthusiasts know that setting up an inflatable caravan awning can be a daunting task. However, with the right approach and a few tips, anyone can pitch and set up their inflatable caravan awning like a pro. In this article, we will provide a step-by-step guide on how to pitch and set up your inflatable caravan awnings, as well as some tips to make the process easier.

 

Choose the Right Site

 

The first step in setting up your inflatable caravan awning is to choose the right site. Look for a flat and even surface that is free of sharp objects, rocks, or debris. Ensure that the site is large enough to accommodate your awning and that it is not too close to trees or other obstacles that may hinder the setup process.

 

Inflate the Awning

 

Once you have chosen the site, it is time to inflate your awning. Spread out the awning on the ground and ensure that all the valves are closed. Connect the pump to the valves and start inflating the awning. Be sure to follow the manufacturer's instructions on how to inflate the awning, and do not over-inflate it.

 

Secure the Awning

 

After inflating the awning, it is time to secure it in place. Use the guylines provided to anchor the awning to the ground. Ensure that the guylines are taut and secure and that they are not too close to the awning to avoid tripping hazards.

 

Set Up the Frame

 

Once the awning is secure, it is time to set up the frame. Insert the poles into the sleeves provided on the awning and secure them in place. Be sure to follow the manufacturer's instructions on how to set up the frame, and do not force any poles into place.

 

Attach the Awning to Your Caravan

 

Once the frame is set up, it is time to attach the awning to your caravan. Depending on the type of awning you have, there are various attachment methods. Some awnings have a beading that slides into the caravan's awning rail, while others have a tunnel that fits over the caravan's roof. Ensure that the attachment is secure and that there are no gaps between the awning and your caravan.

 

Adjust the Tension

 

After attaching the awning to your caravan, it is time to adjust the tension. Use the tension straps provided to adjust the tension of the awning. Be sure to follow the manufacturer's instructions on how to adjust the tension, and do not over-tighten the straps.

 

Conclusion

 

Learning how to pitch and set up your inflatable caravan awning does not have to be a difficult task. Following the steps outlined in this article will ensure that you can get it done with ease and confidence. Before setting up your awning, make sure that you check your caravan for any signs of wear and tear, as well as secure all poles, pegs, and guylines.