A hypertufa planter is probably one of the finest options to stone and concrete planters. Hypertufa planters are synthetic rock which will be freely formed into individual shapes and is really a substitute for Tufa Rock but produced by man. Tufa is just a soft cellular rock that is within limestone areas and particularly where water leaks out unusual materials to be able to form an absorbent soft substance. Generally, hypertufa planters are manufactured from a small number of fiberglass shreds, 2 portion of perlite and 1 portion of mortar mix without sand. These planters are very durable, light-weighted and strong.

Hypertufa is just a mixture made from peat moss, sand and Portland cement, which will be formed into any shape and size. It may be used for birdbaths, planters, troughs, and stepping stones among other things. Perlite is being used as a substitute for sand because it reduces the weight of the planter. Hypertufa looks ripened instantly and therefore it attracts mosses and lichens and additionally, it naturally complements shrubs and plants in the garden. These planters are very friendly because they are spongy and bulky they become reservoirs for water. Being spongy it even allows easy passage for the air to pass to the roots. These hypertufa planters and pots are quite ideal for planting different types of plants particularly for alpine plants, succulents, sedum and cacti plants.

In the majority of the countries around the globe the natural Tufa stone has been carved for used in garden planters and pots. Once the hypertufa mixture is properly made then the top has the look of ruggedness and natural aging.

How to make a Hypertufa Planter: For a rectangular or a square tub you need two coated cardboard boxes where one is slightly smaller to one other box by about 5 to 6 cm. The smaller box will undoubtedly be placed inside greater box while the hypertufa mixture cement planter molds cures but the gap involving the boxes must certanly be approximately 5 to 6 cm to make certain there's enough wall thickness. These boxes are the mold. For circular containers, use different size buckets, plastic basins and plastic bags.
To be able to support the exterior portion of the box use concrete blocks or bricks to brace the exterior and keep it from sagging due to the weight. For the inner box fill halfway with a potting mixture, soil or even sand to incorporate some weight and help keep it in place.

To produce a drainage holes in the underside of the planter, work with a broom stick, a branch or even 25mm and 5 cm long plastic pipe. Or even required this can be removed later. For small tubs only one or two small holes are required and for big tubs make at the very least four to five holes.