Boosting your wifi signal and range will help eradicate all he dead zones from your house or office. Whether it is a garage, pool area or basement, you will get maximum wifi connectivity all over. The Netgear wifi range extender is the best among all in increasing the range of your wifi signals as it not only increases the range but also gives a faster network and streaming quality.
The Mywifiext web site is a local website to configure your Netgear wifi range extender. It is not an ordinary site like other internet sites because you can access it only when the extender is connected. When you connect the extender you will be able to access the Mywifiext site and setup your wifi range extender successfully.
Netgear Wifi Range Extender Setup
The Netgear wifi range extender setup can be done easily on the site link mywifiext.net as it is the local web site to configure the extender. Just place your wifi range extender in the same room as that of the main router, check all the wired connections, see that the internet services are good, check the web browser is up to date to the latest version and see that the firmware of the wifi range extender is updated. When you have checked all these things you can see the procedure to setup your wifi range extender below. There are two ways to setup your range extender, below is the web browser method for you –
1- Plug your extender and see if the power LED is switched on
2- Open your wifi enabled device
3- Launch a web browser and go to the address bar
4- Type the site address www.mywifiext.net
5- Login with the default credentials or create an account and then login
6- You will be shown the setup page now
7- Follow the instructions to setup your extender
8- Save all the settings
9- Finish the setup
Extender Firmware Update
If you are shown a prompt of your wifi range extender’s firmware update, you need to first update your extender’s firmware to be up to date. The steps to update your extender’s firmware is given below –
1- Connect your extender and your device with the help of the Ethernet cable
2- Open a web browser and go to the site www.mywifiext.net
3- Login with the default credentials
4- Now on the setup page you will see the extender’s menu icon. Click on the menu.
5- Go to the firmware update page
6- Select the settings option and go to firmware update
7- If in case you cannot see this option you can go to the maintenance option and go to firmware upgrade
8- You will see the check online or check option, click on it
9- Just follow the onscreen prompts now after seeing the available firmware update
10- Finish updating the extender and log out
11- Let the extender reboot
12- Go to Mywifiext.net site again and login to check if all went well
These were the easy steps to setup your Netgear wifi range extender on Mywifiext site. After updating the firmware of the extender you can set it up and place it at a location where the extender receives best wifi signals. Once this is done you can experience the fast wifi connectivity all over in your home or office, great HD video streaming quality, gaming and much more.