SLM4 metal mesh laminated glass by Fusion Glass Designs Ltd.

Metal meshes from finely woven gauzes to thickly braided weaves and decoratively etched metal foils, offers an innovative range of structural and design possibilities. These materials allow the transparency, rigidity and structural qualities of glass to be combined with the decorative and aesthetic qualities of the metal weaves and meshes.To get more news about laminated glass metal mesh, you can visit boegger.net official website.

process
Laminated glass is the process by which two or more layers of glass are bonded together using PVB (polyvinyl butyl) or EVA (ethylene vinyl acetate) using heat and pressure. This process can be carried out using annealed or toughened / tempered glass of any thickness to create safety or acoustic glass in large panel sizes.

dimensions:
Minimum thickness 14 mm (6+6mm glass + laminated interlayer) dependent on mesh.
Additional thickness on request or glass specification required.
Width dependent on mesh. Max length 4700mm.

glass type:
Float glass -slightly green tint.
Low iron -crystal clear.
Metal meshes laminates can also be combined with silvered/mirrored or opaque backing layers of glass for use as cladding, or when fixing back to structural substrates.

additional information:
Glass can be toughened / tempered or laminated to required national & international safety standards.
Tailor - made to clients' requirements, including curved to radius, cut to complex shapes and drilled or countersunk.