Welcome to
On Feet Nation
Amelia Cruz Online
umair Online
Khalid Shaikh Online
The Autoparts Shop Online
DANGERBOY Online
rimeton454 Online
jack Online
Micheal Alexander Online
Posted by Khalid Shaikh on May 21, 2024 at 6:28am 0 Comments 0 Likes
Posted by bsoftindia on May 21, 2024 at 6:21am 0 Comments 0 Likes
Posted by Rahul kumar on May 21, 2024 at 6:19am 0 Comments 0 Likes
Posted by Micheal Alexander on May 21, 2024 at 6:18am 0 Comments 0 Likes
SMD Double Splice Tape for 8 mm paper(or flat) component tapes
SMD Double Splice Tape has two rows of raised dots that engage with the sprocket holes of SMD paper (or flat) Tapes. This ensures accurate alignment of the SMD Tape ends and positioning of the joining strips on the Cover Tape as well under the component pockets. No other materials or tools are required for the splicing process. After removal of the printed paper cover from one of the yellow self-adhesive splicing strips the trimmed SMD Tape ends are arranged so that half the number of the raised dots of the clear foil adjacent to the adhesive strip engage with the sprocket holes of each SMD Tape end. This is followed by removal of the other half of the printed paper cover, folding the clear carrier foil around the SMD Tape ends, pressing the two halves firmly together and removing and discarding the carrier foil.smt double splice tape 8mm
SMD double splice tape for 8,12,16 & 24mm component tapes
* Sizes available: 8mm, 12mm, 16mm, 24mm
* The most economical splicing solution
* Increases efficiency
* No down time because of accurate joining
* Tape connectors guarantee perfect and reliable joints in 8 mm SMD tapes
* Joining without any tools or fixtures, with precise pitch spacing, with convenient pre-cut length
8mm, 12mm & 16mm - 500 pcs / box
24mm - 250pcs / box
© 2024 Created by PH the vintage. Powered by
You need to be a member of On Feet Nation to add comments!
Join On Feet Nation