At first glance, stainless steel bar would be too expensive for use in any large concrete structure. However, in specific applications, the final result of the building can mean greater economics when the stainless steel bars support the concrete. For some purposes, no other kind of reinforcing bar will suffice. 

 Characteristics of stainless steel bars

The one characteristic of stainless steel that is valued above all others is that it is highly resistant to various forms of corrosion, depending on how a given grade of stainless steel was made.However, the alloy also has other notable properties that you should always consider when purchasing stainless steel bars, sheets, and other products for a specific application or aesthetic. These include:

• High Strength: Stainless steel is considered a relatively strong metal, although the tradeoff for this strength is increased weight, which means it is only sometimes the best choice for all types of structural or weight-critical applications.
• Non-porous: Non-porous is a key factor in stainless steel's ability to resist corrosion, in addition to the specific chemical composition of its alloy.  
• Hygienic, low maintenance, and non-reactive with many substances: This includes most foods. Stainless steel does not contaminate flavours or colours, which is why it is frequently used in kitchen and utensil environments.

Up to this point, duplex round bar suppliers in India have shown you everything you need to know about stainless steel bars. Now that you know all its amazing properties, you won't regret using this material in your projects.

Stainless Steel bar Grades

The alloys or grades that are usually preferred for the manufacture of bars are:

Mild steel bars

Mild steel bars are used for their tensile stress in reinforced concrete, beam, slab, etc., in reinforced concrete work. These steel bars have flat surfaces and rounded sections ranging from 6mm to 50mm. These bars are manufactured by Titanium Round Bar suppliers in India to a great length and can be easily cut and bent without damage.

Deformed steel bars

Because deformed bars are steel rods provided with lugs, ribs, or deformations in the bar surface, they minimize the chances of concrete slippage and increase the bond between the two materials. These have more tensile stress than mild steel bars and can be used without end hooks.

Steel bars for reinforced concrete work

All steel bars for reinforcing work must be carefully plated to the specified dimension and weight. They must be in good condition, free of cracks, surface damage, lamination, imperfect ends and other defects. You can choose steel bars from SS 316L Round Bar suppliers in India.

General precautions for reinforcing steel bars

• Steel bars must be stored in such a way that they do not distort, deteriorate or rust.
• Steel bars should not be cleaned with oily substances to remove rust.
• The entire bar should be used.
• Overlapping bars must not touch each other and must be kept apart by the concrete.
• The overlap should be staggered
• Steel bars must not move while concrete is being poured.

Remember, the preferred type of stainless steel rod to be used in concrete construction depends on the ultimate design goal of the structure. SS 316 Round Bar suppliers in India hope you found this information interesting and useful!