Some access points (sometimes said as routers or hubs) feature AN automatic association button tagged “WPS” that stands for Wi-Fi Protected Canon Setup.

This allows permissible devices like your PIXMA printer to attach to your network with no need to enter a watchword and it permits a fast and straightforward technique of connecting your devices.

This technique is out and away from the best approach of connecting your PIXMA printer therefore if your access purpose incorporates a WPS button please choose ‘WPS association Method’ below for directions on connecting victimization this technique.

If your access purpose doesn't support WPS we've provided different directions to urge your PIXMA printer connected therefore please choose 'Standard association Method' below.
WPS association technique
Before we have a tendency to begin, there are some conditions that have to be met so as to use the WPS electrical switch method:

The access purpose should have a physical WPS electrical switch accessible.
Please visit your device’s user guide for details.
If the WPS electrical switch isn't accessible please use the directions within the customary association technique.
Your network should be victimization the WPA (Wi-Fi Protected Access) or WPA2 security protocol. Most WPS enabled access points to use this protocol.

Step 1
Make sure that the printer is turned on.
Press & hold the [Wi-Fi] button on the highest of the printer until the alarm lamp flashes once.

Step 2
Make sure that the lamp next to the present button starts to flash blue so visit your access purpose and press the [WPS] button at intervals two minutes.

For actual details on beginning WPS on your access purpose, please ask its user guide.

The (blue) Wi-Fi lamp on the printer can continue flashing whereas looking out, and also the power and Wi-Fi lamp can flash once connecting to the access purpose.

When the printer has with success created an association to your wireless network, the facility and Wi-Fi lamp can stop flashing and stay lit.
Network settings confirmation
To confirm that your printer is with success connected to your wireless network for Canon setup Printer, you'll print out the network settings of your printer if you wish:

1. certify that your printer is turned on.

2. Load a sheet of A4 or letter-sized plain paper.

3. Press & hold the [Resume/Cancel ] button till the alarm lamp flashes fifteen times, so unharness it.
The network data page is written.

When concerning the output, make certain the “Connection” indicates “Active” which the SSID - Service Set symbol (the name of your wireless network) indicates the right name of your wireless network.

This concludes the WPS setup procedure.

Please currently proceed by putting in the software package to form the foremost out of your PIXMA MG3540.

If you are doing not have the installation CD that came along with your product, please transfer the manuals and software package to continue.

If the WPS wireless Canon setup remains failing when following this guide, please contact the U.S. for more help.
Standard association technique
Step 1
1. For Windows users, insert the CD that came along with your printer and run the setup.

If {you do|you are doing} not have the installation CD that came along with your product otherwise you are a waterproof user, please transfer the manuals and software package to continue.

2. once the initial screen seems, click on [Next].

When the subsequent screen seems, sort your watchword to permit the helper tool to be put in, then click on [Install Helper]

When the subsequent screen seems, click on [Next]

Please note: A screen is displayed asking you to pick between a USB or wireless Canon setup association, please choose [Wireless Connection].

3. make sure that your printer is turned on, certify the facility lamp is on so click [Next].

Step 2
1. Click [Connect to the network].

2. once the subsequent screen seems, click [Cableless setup].

Please note: For Windows XP users the cableless install technique isn't supported, please choose the [Other setups] technique, then proceed to step five.

3. once the [Connection via Cableless setup] screen seems, hold down the printer’s [Wi-Fi] button (A) till the orange alarm lamp (B) flashes two times, then unharness when the second flash.

4. ensure that the (blue) Wi-Fi lamp (A) flashes quickly and also the (green) power lamp is lit. Click [Next].

Please Note: Your network association is quickly disabled throughout the setup.

Click [Next].

5. Windows XP users solely, choose [Wireless Setup victimization the USB Cable]

Step 3
1. once the subsequent screen seems, choose your region, so click on [Next].

2. once the subsequent screen seems, choose your house of residence so click on [Next].

3. once the subsequent screen seems, choose the software package you would like to put in so click on [Next]. If you’re unsure what software package you wish to put in at this stage, don’t worry, as you'll perpetually uninstall it at a later stage if you would like.

4. once the subsequent screen seems, click on [Yes] to comply with the tip user license agreement.

When the subsequent screen seems, click on [Next].

5. the subsequent screen indicates the model of your printer and also the name (or SSID) of your wireless network.

Windows (excluding Windows XP Users)

Click [Complete].

This concludes the Windows Cableless Canon setup.

For Windows XP users, or users wherever the printer couldn't be detected, please continue with the USB installation elaborated in step vi.

When the subsequent screen seems, click on [Add Printer]

In the following screen, choose the [Canon IJ Network] driver version and click on [Add].

Click [Next] to finish the setup.

This concludes the waterproof Cableless Canon setup.

For users wherever the printer couldn't be detected, please continue with the USB installation elaborated in step vi.

USB cable setup for Windows XP users and wherever the network association wasn't detected

6. choose [Set up network association via USB], then click [Next].

7. once the subsequent screen seems, connect your printer to your pc victimization the equipped USB cable. this is often the cable with the image on the connexion.

For waterproof users, click [Next].

8. Once your printer has been detected, the subsequent screen can seem.

The name of the access purpose that your pc is connected to is displayed (where “xxxxxxxxxxxxx” is shown).

If this is often the wireless network you wish your printer to attach to, click on [Yes].

waterproof users only>

When the subsequent screen seems, click [Allow].

9. once the subsequent screen seems, disconnect your Canon Pixma MX490 setup from your pc and click on [Next].

When the subsequent screen seems, click [Complete].

This concludes the Windows Canon setup.

Once your printer has been detected, the subsequent screen can seem to indicate the name of the access purpose that your pc is connected to (where “xxxxxxxxxxxxx” is shown). Click [OK].

When the subsequent screen seems, click [Add Printer].

In the following screen, choose the [Canon IJ Network] driver version and click on [Add].

Click [Next] to finish the setup.

This concludes the waterproof setup.

If the wireless setup remains failing when following this guide, please contact the U.S. for more help.
Restoring Network Settings to plant Default
If you would like to reset your network settings back to plant default, as an example if you modify your access purpose, you'll do therefore by following these directions.

Please note that format erases all network settings on the machine, therefore printing or scanning from a pc over the network can become not possible till the printer is re-configured with new network settings.

Follow the procedure below to initialize the network settings:

1. Press and hold the [RESUME/CANCEL ] button till the alarm lamp flashes seventeen times.

2. unharness the [RESUME/CANCEL ] button.

The network settings are reset back to plant default settings.

If this method remains failing when following this guide, please contact the U.S. for more help.