Most of the light emitting diode display to be used for companies indoor and outdoor are supposed to be using the SMD technology and they are built-in for this. SMD stands for surface mounted device. The surface mounted technology is sometimes called as dot matrix because there are three colors, i.e., blue, green and red that are called the primary colors and they are placed in one dot and the display is made. In the present century, newer technology is being developed every day and thus the display technology of Led Light Display Board is becoming better day by day.

Outdoor and indoor displays:

The above qualities are supposed to be extended to the outdoor displays but they are more likely to be in Jewellery Rate display boards. They have a viewing angle that is considered to be greater and also there is a capability that is considered to be nearer for viewing distance. The brightness of the indoor light emitting diode screens is also supposed to be high and the color mixing effect is vivid.

Differences between outdoor and indoor LED screens:

• Resolution: The Outdoor Led Video Wall that are supposed to be used outdoors are obviously watched from distances that are greater. When planning to install this video wall, you should think about the quality and features. There is no need of the resolution to be highest in this case. This is because, when the distance is great, the small details are not discriminated by the eyes of the human beings. Therefore, the cost for big dimensions can be compensated by the level of resolution which can be low for providing an image that is considered to be of good quality. However, the resolution is obviously having to be very good for the indoor displays of light emitting diodes.
• The IP level and the cooling system: There is a special technique called the topicalization with which the screens used outdoors are treated. This technique is helpful in order for granting a great resistance to water, air containing different salts, intrusions which are led with corrosion etc. Moreover, there is a special type of system for the forced ventilation of the typical installations of LEDs to be used outsides. It gives the guarantee that the inside module temperature is supposed to remain constant and is not like it passes the level that is known to be critical. There is no need of such technology in the indoor light emitting diode displays provided by best Led Boards Manufacturers.
• System for protection against the sun and vandalism: There is a special type of protection system in the Outdoor Led Display that has a dual function, i.e. it protects the display screen from sun and from vandalism acts. The protection from sun is supposed to be carried by increasing the level of contrast and obtaining the images that are considered to be better.
• Brightness: The brightness level for both indoor and outdoor displays is also different.