Welded Stainless Steel Cabinet Showers are used in prisons and ocean going vessels. The all-welded design makes them ideal for the maximum security requirements of the penal system because there are no removable parts that can be removed to make weapons. In military and merchant marine vessels, the all-welded construction prevents water seepage.The showerhead sprays water toward the corner of the cabinet. 

This prevents water from escaping from the entrance and creating a slip hazard the floor. The unit features a large 2 and one quarter inch drain pipe and a reinforced receptor pan.Welded stainless steel cabinet showers are made from Type 304 stainless steel. This is a very heavy gauge type of stainless steel. The unit, after construction is complete, forms one seamless welded surface with no separation. This is because after construction all exposed welds are ground smooth.

 This eliminates all accessible seams and voids.The underside of the receptor is reinforced with a heavy stainless steel center support to the floor. Also, the drain has over 2 square inches of free area. In order to prevent vandalism in prison, or stress from turbulent seas, waste pipe connections are anchored.The valve has to be field installed. A severe service showerhead resides on the inside of the entry. It has concealed piping that connects it to the chase wall.

 The stainless steel soap dish is fastened to the wall with concealed fasteners. There is also a tension-release towel hood that is secured on the outside of the entry.On the chase wall, the elbow waste and P-trap are sloped one quarter per foot. They are factory piped and have a no hub connection. There is also a two inch caulk style waste available if requested.There are two different valve arrangements that can be selected. Both types are chase located.Welded stainless steel cabinet showers feature stainless steel air metering valves.

 These valves operate on a 5 to 60 second timing cycle that can be adjusted from the chase side only. This prevents people who are using the shower from tampering with the water flow.Water flow is controlled from the inside through touch time controls. Solid state, digital BASIN POP UP DRAIN WASTE WASTER DRAINER circuitry activates this feature. When the user presses the push button, the control sends a signal through the internal circuit. This controls the opening and closing of solenoid valves. This touch time system operates on a 24 volt power or on 110 volts of power through an optional transformer. 

The timer is set to 60 seconds and is automatically, electronically controlled.In spite of their high security intent and design, welded stainless steel cabinet showers are attractive in form as well as function. Units are covered in a number four satin finish. The receptor is designed with a non skid surface to prevent slips and falls. The exposed fittings are triple chrome plated to protect against corrosion for units installed in sea going vessels.Welded stainless steel cabinet showers are free standing units. However, they can be wall anchored with optional anchors. This is recommended for penal facilities where vandalism is likely to be attempted.