When renovating a house or apartment, it may be necessary to move existing lamps or install new ones. However, you will face the problem of installing lighting and connecting to the mains. Accordingly, to connect luminaires, you cannot do without cable products. Depending on the situation and installation conditions, you need to select the appropriate brand and cross-section of the conductor. In this article, we will consider which cable to choose for lighting in an apartment, house and in other conditions.

Construction and section

Cable products are distinguished by cross-section, type of insulation, presence of armor, number of cores and their flexibility class. If we talk about lighting, then for stationary lamps, such as a chandelier or sconce, then they assume a stationary (fixed) installation, for this a rigid wire or a cable with a single-wire (monolithic) core is suitable. To connect a table lamp or a lamp that can change its position, a flexible core is needed.

Let's make a reservation right away that in household wiring, including for lighting, the use of copper control cable and wires with aluminum conductors is prohibited by the requirements of the PUE. Therefore, modern electricians always use copper wires and cables for this purpose . It is also worth remembering that in a wooden house it is recommended to lay external wiring in corrugations, pipes or cable ducts. If you are looking for the best wire company in delhi contact us.

In an apartment and a private house

When choosing a cable for wiring , most often the same brand is used for sockets, lighting and individual powerful consumers. Therefore, on light, you can use the same option as for the outlet group. The most popular cable for lighting in an apartment and a house is VVG . With hidden wiring, it is one of the best options. In a wooden house, use a cable that does not propagate combustion - VVGng , VVGng-LS or NYM .

Important!
When using a wire with stranded conductor ends, which will be connected to the luminaire, if you use a screw terminal block, you must be sure to tin or end with NSHVI-type lugs . If you will be using WAGO terminals , this is not necessary.