irfl3402 datasheet download

Name: irfl3402 datasheet download
Category: Downloads
Published: chaihydlithew1983
Language: English

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Prolog download.
This area of the ProLog website provides our customers with files that support the operation of the ProLog system. Some file Some files, like the CallMaster Supplement file, require a User ID and password while others are provided as a service to keep your ProLog system up to date with the latest Executable, Prefix, Award and Help update files.
When ProLog-V8 was installed on your computer, a folder named "X:\\ProLog Update Files", was created in the root directory of your volume (Typically 'C') where ProLog-V8 was installed. This folder is used to store the various update files that support the Prolog System. Once the update file(s) have been downloaded to the Update Files folder, the new ProLog Updater Program (PUP) will handle the local transfer and integration of the update file(s).
The downloading and installation process together with file format descriptions is comprehensively covered in the ProLog-V8 Help File. For Users of ProLog-V7 and for the general convenience of all, that section of the Help File has been replicated on this website. Click here to display that information.
ATTN: Malwarebytes Users.
The Malwarebytes program interferes with the installation of ProLog program files. Apparently it not only prevents installation but either deletes the installer program or moves it into quarantine WITHOUT WARNING! If you are using Malwarebytes you need to disable Malwarebytes during installation or exclude a few ProLog folders from Malwarebytes. If you use the Exclusion options you should be able to keep Malwarebytes running during ProLog update installations To exclude ProLog from scans, open Malwarebytes and click on the Settings tab, followed by the Exclusions tab. From the Exclustions tab navigate the the " C:\Program Files (x86)\PROLOG-V8 " folder and add that folder to the exclusions list. If you are running the 32-bit version of Windows, navigate to the " C:\Program Files\PROLOG-V8 " folder and add that folder to the exclusions list. The final folder to exclude is the folder used to install ProLog updates. Again, from the Exclusions tab in Malwarebytes, navigate to the " C:\ProLog Update Files " folder and add that to the exclusion list. You can refer to https://www.malwarebytes.com/support/guides/mbam-legacy/MalwareExcl... for information directly from Malwarebytes. If you attempted to install a ProLog update or upgrade and it was deleted by Malwarebytes, follow the instructions on exclusion that are outlined above, and again download and install the update or upgrade file. Please keep in mind that ProLog does not and never has included any spyware, malware or viruses in any of its programs.
ProLog-V8 System Upgrade File (UD_V8.40.06)
Attention ProLog Version 8.40.x Users: If you are currently using the licensed version of ProLog Version 8.40.xx, the UD_V8406 file is an UPDATE and is completely free. Simply download and install the update using PUP. For information on the V8.40.06 enhancements, click here . Users of ProLog Versions 8.30.2 or earlier must purchase this version as an upgrade before use and are referred to NOTE-1 below.
2) If your ProLog version is V8.30.1 or greater, proceed to step #4.
3) If your ProLog version number is less than or equal to V8.10.7 then you must first download and install the UD_V8302 version update, then re-index all of your logbooks.
4) When your ProLog system version displays "V8.30.1" or "V8.30.2" (Help > About ProLog), your ProLog system is up to date, you may then proceed to purchase the V8.40.06 upgrade from the secure order form .
WARNING!! Do not download and install the UD_V8406 upgrade until you have purchased the upgrade and have received an authorization email from DataMatrix. The reason for this warning is that the installation process will overwrite your existing version of ProLog, and without the proper authorization code and license, the upgrade application will not launch. Should this occur, to return your ProLog system back to normal operation, you will have to roll-back the UD_V8406 upgrade installation by downloading and re-installing the UD_V8302 update package. Alternatively, simply leave the UD_V8406 installation in place, order the UD_V8406 upgrade package via the secure order form , and we will send you the authorization codes via Email.
***** As a precaution, prior to downloading and installing any System Update File, backup all of your logbooks. *****
Important: In Order to Download and Integrate the ProLog-V8 System Update file, you must have the Prolog Updater Program (PUP) installed on your local system. Click here to navigate to the PUP download section.
W hen ProLog-V8 was installed on your computer, a folder named "X:\\ProLog Update Files", was created in the root directory of your volume (Typically 'C') where ProLog-V8 was installed. This folder is used to store the various update files that support the Prolog System. Once the update file(s) have been downloaded to the Update Files folder, the new ProLog Updater Program (PUP) will handle the local transfer and integration of the update file(s). This system update file must be downloaded into that folder prior to launching the PUP program. T he System Update File contains individual files that will update the ProLog-V8 executable, Prefix Database, Award Templates, ADIF definitions, Cabrillo Definitions, Rig Control Files, and the Map and Flag files. It is not necessary to download and install any previously released System Update File(s) as this update file encompasses all previously update releases. This download also includes the latest Help Files. Future Updates will be posted and may be downloaded from the Help File update section on this page. Periodically check that section to make sure you have the latest Help File Update.
M ake sure you read the version history page that will be displayed after the System Update file has been Installed. It may contain additional instructions relative to the changes made to your ProLog System with this update. After the update(s) have been downloaded and installed, launch ProLog-V8, click "Help", then "About ProLog" and verify that the ProLog executable version number is "V8.40.06" dated "August 25, 2019", the Prefix File version is "V6.01" dated "April 5, 2019" and the HTML Help File version number is "V8.40.6". If the version numbers and/or dates of these files do not correspond with the versions previously stated, the system and/or Help update file has not been properly installed. Download the file again and follow the procedures outlined in the ProLog "Help > Downloading Update Files" menu entry.
File Description.
Date Posted.
System Update File Version 8.40.06.
26-Aug-2019.
ProLog-V8 System Update File (UD_V8.30.2)
***** As a precaution, prior to downloading and installing any System Update File, backup all of your logbooks. *****
Important: In Order to Download and Integrate the ProLog-V8 System Update file, you must have the Prolog Updater Program (PUP) installed on your local system. Click here to navigate to the PUP download section.
W hen ProLog-V8 was installed on your computer, a folder named "X:\\ProLog Update Files", was created in the root directory of your volume (Typically 'C') where ProLog-V8 was installed. This folder is used to store the various update files that support the Prolog System. Once the update file(s) have been downloaded to the Update Files folder, the new ProLog Updater Program (PUP) will handle the local transfer and integration of the update file(s). This system update file must be downloaded into that folder prior to launching the PUP program. T he System Update File contains individual files that will update the ProLog-V8 executable, Prefix Database, Award Templates, ADIF definitions, Cabrillo Definitions, Rig Control Files, and the Map and Flag files. It is not necessary to download and install any previously released System Update File(s) as this update file encompasses all previously update releases. This download also includes the latest Help Files. Future Updates will be posted and may be downloaded from the Help File update section on this page. Periodically check that section to make sure you have the latest Help File Update.
M ake sure you read the version history page that will be displayed after the System Update file has been Installed. It may contain additional instructions relative to the changes made to your ProLog System with this update. After the update(s) have been downloaded and installed, launch ProLog-V8, click "Help", then "About" and verify that the ProLog executable version number is "V8.30.2" dated "April 26, 2019", the Prefix File version is "V6.01" dated "April 5, 2019" and the HTML Help File version number is "V8.03.0". If the version numbers and/or dates of these files do not correspond with the versions previously stated, the system and/or Help update file has not been properly installed. Download the file again and follow the procedures outlined in the ProLog "Help > Downloading Update Files" menu entry.
File Description.
Date Posted.
System Update File Version 8.30.2.
26 -Apr-2019.
ProLog-V8 Help Update File (UD_HELP_8.40.7)
This Download applies to V8 Users Only.
Important: In Order to Download and Integrate the Help Update file, you must have the Prolog Updater Program (PUP) installed on your local system. Click here to navigate to the PUP download section.
T his file contains the latest update for the ProLog-V8 Help File. Verify your current Help File Version by clicking the ProLog "Help" Menu then the "About ProLog" menu entry. In the "Support File Information" section, check the "HTML Help File Version". If your local version number is less than the version number listed above then click the download link below to commence the download process.
File Description.
Date Posted.
Help Update File Version 8.40.7.
25-Sep-2019.
LoTW/1010#/VP# Users Monthly Update File (UD_LOTW_1912)
This Download applies to V6, V7 and V8 Users Only.
Important: In Order to Download and Integrate the monthly LoTW Users Update file, you must have the Prolog Updater Program (PUP) installed on your local system. Click here to navigate to the PUP download section.
T his file contains the latest LoTW, 10-10 Award and VP Number membership information. The update version number is specified above as "UD_LOTW_yymm". Save this file to your "\ProLog Update Files" folder. After the download has completed, launch the ProLog Updater Program (PUP) and install this file from PUP.
File Description.
Date Posted.
LOTW/10-10 User File for December 2019.
1 -Dec-2019.
CallMaster Database Monthly Update File.
Important: In Order to Download and Integrate the CallMaster Update file, you must have the Prolog Updater Program (PUP) installed on your local system. Click here to navigate to the PUP download section.
T he CallMaster update file is made available to those customers that have purchased the Prolog CallMaster database; the file contains the latest license revisions taken directly from the FCC and VE online databases. The CallMaster database supplement file is updated on a monthly basis. This file is initialized each time a new CallMaster volume is released, so do not download an update file if you are using an earlier release of the CallMaster product. Additionally, each update file is edition specific, meaning they are not interchangeable. Use only the update file for your specific subscription. If your update file indicates it is the "6th (Last)" file, this is your final update and your subscription will expire in one month. You can check your update file version at any time by typing "UPDFI" in the Call field and clicking the CallMaster button. In the Comment field of that record is a string of information indicating the Volume issue (i.e., "Apr 2019") and the update file that is currently installed. If the update file name in the Comment field ends with "-6.EXE" it is the final update for your subscription and it is time to renew. Please contact DataMatrix at 1-505-892-5669 or click here to renew your subscription from our secure order form. To download your CallMaster update file, click on the CallMaster Update File name in the left column of the table below.
File Description.
Date Posted UD_CMDB_1911-1 1st Update File for November 2019 Subscription 1-Dec-2019 UD_CMDB_1910-2 2nd Update File for October 2019 Subscription 1-Dec-2019 UD_CMDB_1909-3 3rd Update File for September 2019 Subscription 1-Dec-2019 UD_CMDB_1908-4 4th Update File for August 2019 Subscription 1-Dec-2019 UD_CMDB_1907-5 5th Update File for July 2019 Subscription 1-Dec-2019 UD_CMDB_1906-6 6th (Last) Update File for June 2019 Subscription - Renew 1-Dec-2019 Installing Updates Update Installation Instructions in "Word 97" (.DOC) format 20-June-2012 Installing Updates Update Installation Instructions in "WordPad" (.RTF) format 20-June-2012.
T he ProLog Updater Program (PUP) is a new ProLog Utility that makes the downloading and integration of ProLog Update Files much easier and more convenient than previous procedures. All ProLog-V8 Users will have PUP installed as a part of their system installation so there is no need, with the exception of a possible executable update, to download this file. Users of ProLog-V7 however must download and install this file into their ProLog systems so they can download and install any update or subscription (CallMaster, LoTW, QSL Route D/B) files.
This is accomplished as follows:
1) Download and save the ProLogUpdater executable file to your "x:\Program Files\ProLog-V7 folder.
2) Once the download is complete, open the "x:\ Program Files\ProLog-V7 folder and locate the ProLogUpdater.exe file. Right-click on the file name which will display a menu; locate the "Send To" menu entry, then left-click on the "Desktop (create shortcut) menu entry.
3) If you are running under Windows Vista or Windows-7/8/10, locate and right-click on the "ProLog Updater" shortcut just created, then left-click the "Properties" menu entry, then left-click the "Compatibility" tab. At the bottom of the Compatibility dialog, activate the "Run this program as an administrator" checkbox. If the checkbox is grayed, click the "Shortcut" tab then the "Advanced" button and activate the "Run as Administrator" checkbox. Make sure you "OK" and "Apply" your settings.
4) Once the shortcut has been placed on the desktop, launch PUP and follow the instructions for updating ProLog's System Files, or the CallMaster, LoTW, and QSL Route Databases.
ProLog Updater Program (PUP) Executable Updates (ProLog V7/V8)
This section is to be used by Users that have already downloaded the ProLog Updater Program. If we release any PUP executable updates you will be notified in this section. To make sure you have the latest version, launch your Prolog Updater program and check the version number shown in the Caption Bar. If the version Number is "V1.00" then your ProLog Updater program is up to date. If the version number is less than "V1.00" then a download of the latest version is required.
This is accomplished as follows:
1) Shutdown the Prolog Updater Program or Prolog if it is running.
2) If you are running Prolog-V8 under Windows XP, Vista-32, or Win7/8/10-32 click on the link below and download the ProLog Updater program to your " x:\Program Files\ProLog-V8" folder.
3) If you are running ProLog-V8 under Windows Vista-64 or Win7/8/10-64 click on the link below and download the ProLog Updater program to your "x:\Program Files (x86)\Prolog-V8 folder.
4) If you are running Prolog-V7, regardless of the Operating System, click on the link below and download the ProLog Updater Program to your "x:\Program Files\ProLog-V7 folder.
5) Once the download is complete, launch PUP and verify that the version number in the caption bar is "V1.00" dated "05/05/2012".
File Description.
Date Posted.
ProLog Updater Program Version 1.00.
5-May-2012.
This Download applies to V7 Users Only.
Important: In Order to Download and Integrate the V7 Update Files, you must have the Prolog Updater Program (PUP) installed on your local system. Click here to navigate to the PUP download section.
There are currently no update files available for Prolog-V7.
Contact Information Tech Support and FAX -- 1-505-892-5669 Postal Address -- 5560 Jackson Loop NE -- Rio Rancho, NM 87144 For Comments or Questions, Please Use Our Contact Form.

https://caribbeanfever.com/photo/photo/listForContributor?screenNam...