To overcome the shortcomings of the edge banding machine in use, it mainly depends on the ambient temperature of the forward edge banding operation, selecting the edge banding strip with good softness and the outer surface of the edge banding for the mesh processing and the hot melt adhesive with good cohesion and delay. If we adopt the above methods, we still can't keep stable edge fantaheatpump banding production and ensure the product quality, we must improve the performance of edge banding machine from the aspect of mechanical design, overcome its disadvantage of "being afraid of cold", and then advance the function of edge banding machine.
1. Heat up. The equipment above the belt conveying organization of the edge banding machine is transported to the external heater to preheat and heat the edge banding strip when passing through the belt conveying organization, increase the softness of the edge banding strip, reduce the stress and tension of the thick edge banding strip (3mm), ensure the adhesive bonding of the edge banding strip under the preheating and softening conditions, and make the cnc drilling machine company bonding between the edge banding strip and the base material stronger.
2. Heat the pad. The heating plate or heating pipe is installed under cnc drilling machine company the belt conveying tray to preheat the edge banding strip on the belt conveying tray. After the heated edge banding strip and hot melt adhesive are coated, the cooling and condensation speed of hot melt adhesive is delayed. It is beneficial to chemical reaction and mechanical interlock in the process of coagulation.