Why does the SPC core flooring factory maintain the floor?

1. Improve the appearance: immediately remove the stains often caused in normal use, so that the elastic lock floor fully presents its extraordinary appearance and natural smoothness.

2. Protect the lock floor: protect the elastic lock floor from the corrosion of accidental chemicals, cigarette butts, shoe marks, oil, and water, reduce the damage of mechanical equipment on the surface to the minimum limit, make the durability of the rubber floor sufficient to make full use of, and then increase the service life of the lock floor.

3. Convenient care: because of the inseparable surface structure and unique treatment of the elastic lock floor, pay attention to the usual cleaning and maintenance, making the lock floor easy to care for and prolonging service life.

Tips of SPC core flooring factorymaintain flooring

1. All kinds of wastes on the ground should be eliminated immediately.

2. It is absolutely forbidden to soak the lock floor in open water. Although some floors are decorated with a waterproof sealant to cut off the water source, long-term soaking will seriously endanger the service life of the lock floor. During the whole cleaning process, the wastewater is immediately sucked away by the water absorption machine.

3. For the area with large passenger flow and great damage, it is necessary to shorten the maintenance cycle time and increase the times of waxing for high-strength surface wax.

4. It is absolutely forbidden to use hard and unsmooth cleaning products (such as wire brush, wiping cloth, etc.) to avoid sharp objects hitting the elastic ground.

5. It is highly recommended to place cushions in the passageway of mass venues with high passenger flow to avoid bringing dirt, sand, and other dirt to scratch building materials.

Maintenance methods of SPC core flooring factory at different stages:

1.Cleaning and maintenance of latch floor after paving / before application

（1）Remove the dust and dirt on the surface of the floor.

（2）Clean and remove the maintenance wax, vegetable oil, dust, and other stains on the surface of the lock floor, and use the water absorption machine to suck away the wastewater.

（3）Wash and suck away with cold water.

（4）If necessary, apply 1-2 layers of high-strength surface wax.

2. SPC floor cleaning and maintenance

（1） Dust removal by dust pushing or vacuum cleaner.

（2）Wet tow.

3. How to clean and maintain SPC floor every quarter

（1）Dust removal by dust pushing or vacuum cleaner.

（2）The cleaning and polishing agent of the lock floor is 1:30 diluted with water to mop the floor or cooperate with high-speed grinding and polishing machine and bright red grinding plate to grind and wash.

（3）1-2 layers of high-strength surface wax.

（4）If necessary, it can cooperate with high-speed grinding and polishing machine and milky white polishing pad.