Welcome to
On Feet Nation
se Online
Ab12 Online
MindCypress Online
Khalid Shaikh Online
sorifislam Online
Micheal Jorden Online
Plastic Packings is suitable for corrosive applications such with low to moderate operating temperatures.
This are economically more important as compared to metal packings. They are less bulky as compared to ceramic random packings. Thus its resulting in higher capacity and lower…
Added by Finepac Structures on December 5, 2019 at 4:24am — No Comments
Fabrication Services are provided by the company for setting up Distillation Columns made with specialized metal blocks by the process of assembling. This Fabrication Services are classified into two categories which include Process Equipment Fabrication and Column & Internals Fabrication.
After passing through all the aforementioned steps the…
Added by Finepac Structures on November 28, 2019 at 5:11am — No Comments
When we think of a distillation column, we often overlook what goes into the column itself. The distillation system is filled with packing. There are two different common types: structured and dump packed columns.
Structured Column sound exactly the same. Column packed with pre-made packing. It can be made of metal, plastic or ceramic. The dump packing consists…
ContinueAdded by Finepac Structures on November 1, 2019 at 5:33am — No Comments
The glycol gas hydration procedure is a case of a procedure that gives retention drying out, and all the while, a fluid desiccant gives the way to assimilate water from the gas streamThe glycol arrangement will retain water from the wet gas and, when consumed, the glycol sinks to the base of the contactor while the flammable gas, deprived of the vast majority of the water content, is then moved out of the dehydrator. The glycol gas hydration, bearing the majority of the water took from the…
ContinueAdded by Finepac Structures on October 12, 2019 at 1:18am — No Comments
Used oil is any petroleum-based synthetic that has been used or any oil that has been refined from synthetic or crude oil. During normal use, the oil can get contaminated by chemical or physical impurities in which the oil cannot perform well. In this time, the oil is replaced or re-refined to do its purpose. Used Oil refining reduces greenhouse gases and heavy metal emissions when compared to burning used oil as…
ContinueAdded by Finepac Structures on September 18, 2019 at 5:12am — No Comments
Gas dehydration, although a technical process, it is, to a large extent, concerned with various operational as well as commercial factors, such as the welfare of the equipment, as well as the quality of the product from the viewpoint of its saleable value.
Finepac Structures is one of the most reputed names offering a wide range of mass transfer technology products and services, along with many others, out of which…
ContinueAdded by Finepac Structures on July 23, 2019 at 9:37am — No Comments
Gas dehydration, although a technical process, it is, to a large extent, concerned with various operational as well as commercial factors, such as the welfare of the equipment, as well as the quality of the product from the viewpoint of its saleable value.
Finepac Structures is one of the most reputed names offering a wide range of mass transfer technology products and services,…
ContinueAdded by Finepac Structures on July 23, 2019 at 9:18am — No Comments
The mass transfer solutions for refining, petrochemical, gas processing are mostly specialized by the Finepac. In the field of mass transfer technology, these have experimented a lot and that’s why they are now said to be one of the most experienced companies. By developing the innovative ideas they are now expert in building the best out of the worst. These yields higher valued and technology products to give us the most innovative of them. Other than this they also consider the things…
ContinueAdded by Finepac Structures on July 14, 2019 at 9:00pm — No Comments
Distillation equipment is very necessary. This is very effective in increasing the contact area with rising steam. Most companies use the latest technology to be more efficient. What is important is less labor-intensive. You get the best distillation type among Pune's equipment manufacturers for Finepac.
Our main objective is to provide industry standards.…
ContinueAdded by Finepac Structures on June 20, 2019 at 8:26am — No Comments
Column systems are an integral part of the petrochemical industry. These critical components and its various parts are crucial when one needs to get high-quality products and meet set separation requirements. It is one of the many reasons why while installing a column system; one should consult with the experts for best results. If that is not done, one can end up with a less efficient…
ContinueAdded by Finepac Structures on June 16, 2019 at 10:30pm — No Comments
Static mixers are highly-engineered, immobile mixing devices that enable in-line continuous mixing of fluids within a pipeline. Because there are no moving parts, static mixers utilize the energy of the flow stream to create a consistent, cost-effective, and reliable mix. Static mixers can be applied to a wide range of process operations, including dosing, dispersion, laminar flow heat…
ContinueAdded by Finepac Structures on June 4, 2019 at 7:00am — No Comments
The principal requirements for packing are that it should:
1.Provide a large surface area: a high interfacial area between the gas and liquid.
2.Have an open structure: low resistance to gas flow.
Promote uniform liquid distribution on the packing surface.
3.Promote uniform vapor gas flow across the column cross-section.
.Various types and packing types have…
ContinueAdded by Finepac Structures on May 24, 2019 at 3:00am — No Comments
Biodiesel can be used as an alternative fuel without replacing the engine. Currently, we are planning only 5-20% of the biodiesel mixture in petroleum fuel. Although biodiesel is being applied as a petroleum diesel alternative, This is due to a rapidly declining energy crisis in the oil reserves, a deeper perception of the environment, and renewable sources of vegetable oil as a biodiesel…
ContinueAdded by Finepac Structures on May 7, 2019 at 7:53am — No Comments
The Pall Rin is one of the most common and most popular packings, the Metal Pall Ring is an industry-standard designed media developed by Raschig Ring and widely used in various applications. Minimizing the number of contours and cracks that can cause fluid retention and potential clamping, the geometry of the metal annular ring enables high gas and liquid transfer rates. The open cylinder walls…
ContinueAdded by Finepac Structures on April 17, 2019 at 5:18am — No Comments
The petrochemical industry cannot do without critical components for their distillation unit like distillation column and related distillation equipment. It is one of the many reasons why entrepreneurs associated with the petrochemical industry are always on the lookout for reliable technological partners as well as solutions providers.
If a company is looking for reasonably priced,…
ContinueAdded by Finepac Structures on April 13, 2019 at 1:46am — No Comments
As the name suggests, Gas Dehydration is an important process to remove moisture gas, the most common impurity. If the moisture content exceeds the allowable limit, the transport line will begin to clog, causing corrosion of the valve, fitting or gas line itself. The problem becomes serious when there is a temperature change associated with the process.
Finepac specializes in gas dehydration processes and is a…
ContinueAdded by Finepac Structures on April 1, 2019 at 5:29am — No Comments
Structured packaging is a range of materials specially designed for use in chemical reactors as well as distillation and absorption columns. They are typically made of thin corrugated metal plates or columns designed to force fluid into complex paths throughout the column. The design is ultimately intended to create a large surface area for contact between the different stages.
It is…
ContinueAdded by Finepac Structures on February 16, 2019 at 1:00pm — No Comments
The importance of column internal design is often overlooked in most packed column designs. Steam and liquid distribution are critical to ensure the efficient performance of the distillation column. Inner column is the most important accessory. It is used for distillation purposes. The unique shape of our range provides the appropriate surface area for gas and liquid…
ContinueAdded by Finepac Structures on February 3, 2019 at 7:00am — No Comments
© 2024 Created by PH the vintage. Powered by