accelerating bearing damage during production

Mobile impact crusher bearings are damaged during production due to friction with materials or the operation of the staff, which in turn causes damage to the production of the equipment. Here are the main reasons for accelerating bearing damage during production.

The damage caused by the mobile impact crusher production is largely due to improper operation, especially the damage of the bearing of the equipment. Since the bearing has a very important influence on the operation of the equipment, it must be paid attention to when using it. Bearing protection, this article to explain what is the reason for the acceleration of mobile impact crusher bearings.

More common is the bearing damage caused by incorrect installation. Because the operator does not understand the installation of the equipment, the brute force is used during installation. The hammer directly hits the bearing and the bearing is more harmful. This is the main cause of deformation. In addition, the installation is not in place. If the installation is biased or not installed in the bearing position, the bearing clearance is too small, and the bearing will be damaged during production;

Views: 2


You need to be a member of On Feet Nation to add comments!

Join On Feet Nation

© 2020   Created by PH the vintage.   Powered by

Badges  |  Report an Issue  |  Terms of Service