The Debugging Of Dolomite Powder Machine

The dolomite powder machine is an indispensable equipment in the concentrator, and it is also a very critical equipment in the construction of the entire concentrator. Therefore, it is very important to ensure the stable operation of the dolomite powder machine. 
However, before it is officially put into operation, the debugging of the dolomite powder machine is a very important step, and there can be no deviation at any point, otherwise the particle size of the dolomite powder machine product will not meet the requirements, and even the metal recovery rate will be reduced. 
So how to debug the dolomite powder machine? Let's see how SBM dolomite powder machine does in the debugging process. The debugging of the dolomite powder machine should confirm whether the debugging conditions are met, run empty and under load, and check the status of all aspects of the equipment. 
Check whether the dolomite powder machine meets the following debugging conditions. Whether the dolomite powder machine equipment is fully installed according to the drawings, and ensure that all parts of the equipment are in the correct position.

Views: 8

Comment

You need to be a member of On Feet Nation to add comments!

Join On Feet Nation

© 2022   Created by PH the vintage.   Powered by

Badges  |  Report an Issue  |  Terms of Service