Welcome to
On Feet Nation
Carlos Online
George Online
Anissa Sherpad Online
Yolanda Online
Health Pharmacie Online
Tommy Online
Posted by Health Pharmacie on April 28, 2024 at 8:48pm 0 Comments 0 Likes
Posted by Health Pharmacie on April 28, 2024 at 8:48pm 0 Comments 0 Likes
Posted by Health Pharmacie on April 28, 2024 at 8:47pm 0 Comments 0 Likes
Scm-01 series drawer mold frame features:
1. The drawer type mold frame is safe and reliable: additional positioning safety device, safe and reliable use;
2. The drawer type mold frame is easy to operate: it adopts bearing combination, slides stably and is equipped with an independent die lifting device;
1 3. The drawer type mold frame Concealed Inset Cabinet Hinges can save space: it covers an area of only 1.8 square meters and can store dozens of small and medium-sized molds.
4. The structure of the drawer type mold frame is simple: it is assembled by a variety of combined components, which is easy Drawer Slide Damper Manufacturer to disassemble, connect and assemble.
how to use:
1. Pull type laminate: it can be opened 100%.
2. Load bearing capacity of pull-out laminate: the uniform load of drawer type die frame can bear 100-1500kg / laminate.
3. Adjustability: the vertical spacing of 5 cm can be adjusted freely.
4. Additional connection: the drawer type mold frame is used for expansion, and the sub frame can be easily connected to the main frame.
5. Optional accessories: drawer type mold frame can be added with side plate, back plate, door and laminate safety locking Undermount Soft Close Drawer Slides device.
6. Installation: the drawer type mold frame must be reliably fixed on the ground or floor.
CAD three-dimensional design drawing of drawer type mold holder:
© 2024 Created by PH the vintage. Powered by
You need to be a member of On Feet Nation to add comments!
Join On Feet Nation