If your door is not opening when you press the buttons, the problem could be with the motor. It could be that the plug is not inserted properly. To fix this problem, you need to plug the motor back in to its socket. Check that the cables are straight and parallel to the torsion springs. If they are, you may need to replace the cable. If not, call a garage door repair expert.
A garage door that does not respond to the remote may be in "Vacation" or "Lock" mode. If this happens, you should remove the batteries and try to open the door again. The remote may be blocked, or the door may be damaged. In this case, you can try unplugging the battery by using the wall control inside the garage. A remote might not be working, or you simply haven't set it properly.
https://vikingoverhead.com/where-can-i-find-a-reliable-garage-door-...
If you still have the problem, it may be the photo-eye sensor. Some of these sensors are broken and prevent the door from opening. Other models stop half-way through movement. Cleaning the lenses and clearing the path between them should fix the problem. Occasionally, the door might not respond to the remote at all. Depending on the type of door you have, the problem may require a technician to come out and check the system.
The next step to take is to check the spring. If the spring is broken, the garage door may not be able to lift more than a foot off the ground. If the spring has broken, you should call a technician immediately. You might need to change the frequency of your garage door if you are not a professional. Some models have a "learn" button, which you must push to correct the malfunction. Then, press the remote button to set the frequency for your door. The indicator light should blink, and the remote will no longer work.
When the garage door will not respond to the remote from the outside, it may be locked. This means that you cannot open it even when you press the lock button on the control panel. In this case, you should first unplug the garage door and try to open it manually. If it still does not work, you can try replacing the battery or trying to reprogram the remote. Make sure to follow the instructions carefully.
Sometimes, the problem could be the remote's antenna. To reset the garage door, you should check the antenna and clean it. If you have an automatic door opener, it may be in "vacation" mode. If it is locked, you need to unplug the power cord. If the remote doesn't work, you should call the serviceman. The remote's transmitter has to be in the correct position for the door to open and close.
If the garage door opener isn't working correctly, you might need to reset it. This can be easily done by checking the battery and the antennae. If the spring is broken, you may need to replace the entire unit. Changing the battery is another solution, but it will only solve the problem for a while. You should call a professional garage door service if the problem persists. This will cost you a little bit of money, but it will save you time in the long run.
First, check the electric breaker. If the door is closed, the opener may be blocked. The problem could be with the electric breaker or the trolley. To fix the problem, you can reset the breaker. Once the breaker is reset, the garage door will open. In addition, if the door has been locked from the inside, you must check the opener's batteries. If the electric switch is in the wrong position, it might be the culprit. To Know More: https://www.a1aoverheaddoors.com/

If the door opens and closes normally when you press the buttons, the safety sensors are probably broken. If the safety sensors are not working, the door may be in "Vacation" or "Lock" mode. You can fix the problem by disengaging these cables and then replacing them. Then, you should check the safety sensor. If the wires are broken, they can interfere with the signal. If the sensors are in good condition, the door should open and close with the push of a button.