Blog Posts

電子煙和香煙哪個危害大?

Posted by dajksdhj21 on September 18, 2024 at 10:31pm 0 Comments

長久以來,關於電子煙和香煙哪個危害更大的討論未曾停歇。在全球範圍內,吸煙已被證明是導致多種嚴重健康問題的主要原因,包括肺癌、心臟病和慢性阻塞性肺疾病。隨著人們對健康的關注增加,電子菸作為傳統香煙的替代品逐漸流行起來。







電子煙和香煙哪個危害更大仍然是一個備受關注的問題,一起來看看,希望能幫到你。



傳統香煙通過燃燒煙草來釋放尼古丁,同時產生大量有害物質,包括一氧化碳、焦油和數千種其他化學物質,其中許多是已知的致癌物。長期吸煙者面臨著嚴重的健康風險,如肺癌、心血管疾病和呼吸系統問題。香煙的危害已被大量科學研究和公共衛生數據所證實。



電子煙則通過加熱含有尼古丁的液體(通常稱為… Continue

Gjsohcat's Blog – September 2021 Archive (19)

Common Transmission Faults Of Calcite Grinder Plant

In case of transmission failure of calcite grinder milling plant, the calcite grinder milling plant is mainly composed of vibrator, screen box, support or suspension device, transmission device and other components.

In case of transmission failure, the calcite grinder milling plant will not be used, which will seriously affect the normal production. At the same time, the transmission fault of calcite grinder milling…

Continue

Added by gjsohcat on September 30, 2021 at 3:28am — No Comments

Five Common Problems Of Barite Ore Mill

Barite mill is a very important milling equipment in mine production. Once it fails, it will directly affect the normal operation of the production line.

As a common type of barite ore mill, what are the common problems of barite ore mill in daily operation? How can we solve these problems? This paper analyzes the causes of five common problems of barite ore mill and puts forward…

Continue

Added by gjsohcat on September 30, 2021 at 2:04am — No Comments

The Grain Size Of Ultrafine Vertical Mill

LUM ultrafine vertical mill feeds mainly through feeding materials to the mine department, and the main function of the feeding department is to quickly feed materials and graded returned sand into the LUM ultrafine vertical mill.

During the operation of the LUM ultrafine vertical mill, it is necessary to ensure uniform ore feeding. The so-called uniform ore feeding means that the number of…

Continue

Added by gjsohcat on September 28, 2021 at 9:50pm — No Comments

The Principle Of Barite Grinding Mill

For many production personnel, there are many matters needing attention when operating the equipment, but the premise is to be able to operate a high-quality equipment model. Generally speaking, the principle of barite grinding mill is relatively complex.

All users must understand the basic knowledge of the equipment in detail before purchasing the equipment, and then conduct comprehensive analysis and summary, so as to buy a satisfactory ideal…

Continue

Added by gjsohcat on September 28, 2021 at 5:05am — No Comments

Large Proportion Of Infrastructure Investment

Grinding operation is a very important operation in the concentrator, that is, materials are crushed before crushing. Grinding equipment is an indispensable existence in the concentrator, which accounts for a large proportion of infrastructure investment.

According to statistics, the energy consumption of crushing and grinding operation in the concentrator accounts for about 65% ~ 75% of the total energy consumption of the concentrator, and steel consumption accounts for almost 100%,…

Continue

Added by gjsohcat on September 27, 2021 at 9:16pm — No Comments

The Processing Stage Of Ultrafine Mill

In the stage of ultrafine mill load test run, the ultrafine mill load test run is carried out under the condition of adding an appropriate amount of mineral material and water to the ultrafine mill.

In the whole process, it is necessary to gradually add materials to the ultrafine mill from no-load to full load. After running for a period of time, if there is no abnormality, the load…

Continue

Added by gjsohcat on September 27, 2021 at 4:14am — No Comments

The Processing Stage Of Ultrafine Mill

In the stage of ultrafine mill load test run, the ultrafine mill load test run is carried out under the condition of adding an appropriate amount of mineral material and water to the ultrafine mill.

In the whole process, it is necessary to gradually add materials to the ultrafine mill from no-load to full load. After running for a period of time, if there is no abnormality, the load…

Continue

Added by gjsohcat on September 27, 2021 at 4:14am — No Comments

The Discharge Port Of Calcite Grinder

There are many reasons for discharging and discharging stones in calcite grinder milling plant machine, some are caused by a single reason, and some are caused by multiple reasons.

The improvement methods are different. During operation adjustment, the primary and secondary shall be distinguished according to the specific reasons, and the adjustment shall be carried out step by step.

It is forbidden to take a…

Continue

Added by gjsohcat on September 26, 2021 at 9:07pm — No Comments

Stone Discharge In Cement Raw Material Milling

In addition, when replacing the lining plate in the later stage, the steel balls shall be screened, and the broken steel balls and small-diameter steel balls shall be cleaned in time.

https://www.grinderprocess.com/info/cement-raw-material-milling.html

Generally, the steel balls with a diameter of less than 15 ~ 20mm shall be cleaned, and the steel balls shall be supplemented…

Continue

Added by gjsohcat on September 26, 2021 at 5:05am — No Comments

Vertical Roller Mill Operation Note

Generally, if the vertical roller mill operation has fatigue peeling, oxidation corrosion, worn pits, cracks or excessive noise, it will cause bearing heating and abnormal sound.

In addition, vibration caused by improper bearing disassembly and loose equipment anchor bolts will also lead to indentation of bearing raceway and rolling element, cracking of inner and outer race of bearing, resulting in…

Continue

Added by gjsohcat on September 25, 2021 at 8:51pm — No Comments

The Bearing Seat Of Raymond Mill

The Raymond mill mostly operates in wet environment, but it is not protected from dust.

When some fine dust enters The Bearing Seat Of Raymond Mill running at high speed, the lubricating oil in the bearing seat will deteriorate and the quality will deteriorate, resulting in the wear of Raymond mill bearing.

When the Raymond mill bearing runs in the worn state, it will increase the friction and heat,…

Continue

Added by gjsohcat on September 24, 2021 at 8:56pm — No Comments

Material Level In The Vertical Roller Mill

The reason why the steel ball is easy to be thrown at the outlet of the vertical roller mill is that the material level in the vertical roller mill is too high.

The reasons for the high material level in the vertical roller mill are as follows: first, the reduction of water material ratio reduces the carrying capacity of water, resulting in the increase of material level in the mill; Second, the inlet material diameter…

Continue

Added by gjsohcat on September 23, 2021 at 9:06pm — No Comments

The Cylinder Of LM Vertical Roller Mill

The amount of water flowing through the cylinder of the LM vertical roller mill should correspond to the material throughput of the LM vertical roller mill and be controlled within an appropriate range.

The water flowing through the cylinder of the LM vertical roller mill is mainly composed of the carrying water and the underflow of the cyclone.

Under normal conditions, the bottom water flow of…

Continue

Added by gjsohcat on September 22, 2021 at 9:00pm — No Comments

The Design Capacity Of Ore Milling Plant

The processing capacity of the ore milling plant is not enough and it is easy to throw stones.For some ore milling plants, the feeding amount of the mill is far from reaching the design capacity during actual operation.

When the feeding amount exceeds a certain limit value, the ore milling plant will throw out ungrounded crushed stones at the outlet, and the amount of stones thrown out is still large, which not only increases the power…

Continue

Added by gjsohcat on September 22, 2021 at 2:48am — No Comments

Normal Operation Of Barite Ore Grinding Plant

Pay attention to ventilation. The external air can be removed at the dust removal position to make the external air flow convection with the air flow in the cabin, so as to slowly reduce the temperature in the mill room. If necessary, a high-power exhaust fan can be installed for indoor cooling.

The high wind pressure causes the fan to heat, which makes the fan temperature too high. During the operation of…

Continue

Added by gjsohcat on September 21, 2021 at 9:29pm — No Comments

High Temperature In Raymond Mill

Raymond mill is a common grinding equipment in the grinding industry, which is suitable for grinding various non flammable and explosive mineral materials with Mohs hardness below 9.3 and humidity below 6%. Sometimes the temperature in the cabin is very high during the use of Raymond mill.

Many people don't know how to solve this problem. Next, Zenith will explain to you the solution to the problem of too high…

Continue

Added by gjsohcat on September 18, 2021 at 4:19am — No Comments

Countermeasures Of Vertical Roller Mill

The cause of temperature rise of the vertical roller mill is confirmed, the fault can be handled immediately by strengthening the ventilation in the barrel of the vertical roller mill; Water spray device can be added to spray water from the grinding head or tail.

The water spray cooling in the cylinder not only uses the sensible heat of water, but also uses the latent heat of water during evaporation,…

Continue

Added by gjsohcat on September 17, 2021 at 9:26pm — No Comments

The Cause Of Vertical Roller Mill Fault

The diagnosis is mainly to compare various symptoms and standards of the vertical roller mill in operation to judge whether the vertical roller mill is in normal operation, so as to find out the causes and eliminate the problems in time before the failure, or predict the operation state of the vertical roller mill according to some symptoms and find the corresponding relationship between performance change and structure…

Continue

Added by gjsohcat on September 16, 2021 at 9:54pm — No Comments

Choose Vertical Roller Mill Manufacturers

First, when purchasing vertical roller mill, you must choose vertical roller mill manufacturers with qualified quality.

Second: when installing vertical roller mill gear, it must be carried out in strict accordance with the requirements of national regulations to ensure that the top clearance, runout and contact of large and small gears meet the specified requirements.

Third: during the…

Continue

Added by gjsohcat on September 16, 2021 at 2:15am — No Comments

© 2024   Created by PH the vintage.   Powered by

Badges  |  Report an Issue  |  Terms of Service