gjsohcat
  • shanghai
  • China, mainland
Share on Facebook MySpace

Gifts Received

Gift

gjsohcat has not received any gifts yet

Give a Gift

 

gjsohcat's Page

Latest Activity

gjsohcat posted a blog post

The Capacity of Mica Powder Production

The capacity of cement will rise for 10-15% if added with mica, and will rise for 20-30% if added mica and slag. It will also increase corrosion stability.When producing mica powder, it can take the method of jointly grinding or separately grinding. The feeding mica fineness should be around 0.08mm (200 mesh), much smaller than other material.Jointly grinding is to send the raw material, gypsum and mica…See More
Feb 6, 2023
gjsohcat posted a blog post

An Overview Of Gypsum

Gypsum is an important renewable resource, containing phosphorus, fluorine and other magazines, the main chemical components are CaO and SO3. gypsum mainly exist in four types of crystalline needles, tabular crystals, dense crystalline, crystal nuclei form. In phosphoric acid production process, part of the phosphate rock is not decomposed, gypsum washing the filtration process is not completely and the addition of additive are all reasons of gypsum containing phosphorus, fluorine and other…See More
Jan 30, 2023
gjsohcat posted a blog post

1000 Mesh Quartz Stone Ultrafine Vertical Mill Operation Site

The main component of quartz stone is silica, which has good oxidation resistance, high temperature resistance, corrosion resistance, and stable physical and chemical properties. It is a commonly used industrial mineral raw material and has a wide range of applications. Quartz stone is generally processed into powder and used more, and quartz stone ultrafine vertical mill needs to be used.With the development of industry, the demand for ultra-fine powder is getting higher and higher, and the…See More
Nov 1, 2022
gjsohcat posted a blog post

Factors Affecting Ultrafine Vertical Mill Running

the operating resistance of the ultrafine vertical mill determines the energy consumption, filtration efficiency and cleaning cycle of the dust removal system. once the operating resistance is too high, the work efficiency of the ultrafine vertical mill will be reduced, resulting in insufficient dust removal capacity, and will also affect the load of the entire system.1. dust concentration at the entrance of the ultrafine vertical…See More
Sep 8, 2022
gjsohcat posted a blog post

The Structure Of The Vertical Roller Mill

The vertical roller mill is mainly composed of feeding part, discharging part, rotating part, transmission part (reducer, small transmission gear, motor, electric control) and so on. Its main working part is a low-speed rotating cylinder mounted horizontally on the bearing, and the cylinder is equipped with a grinding body. The supporting device of the vertical roller mill should bear the rotating part of the whole mill, the grinding…See More
Sep 6, 2022
gjsohcat posted blog posts
Aug 30, 2022
gjsohcat posted a blog post

The Screening Effect Of The Ultrafine Mill

Ultrafine mill is a kind of screening equipment that can be classified, dehydrated, de-slimed, de-intermediated and sorted. The vibration of the screen body is used to loosen, stratify and penetrate the material to achieve the purpose of material separation.The screening effect of the ultrafine mill not only has a great impact on the product value, but also has a direct impact on the…See More
Aug 29, 2022
gjsohcat posted a blog post

Improper Operation Of Kaolin Mining Plant

During installation, the bolts should be loosened, and the welding seam of the side plate and the bottom rib plate connecting the foundation and the flange should be cut open, and the pre-tightening bolts on the joint surface should be processed according to the above operation, and then welded.If the location and cause of the leak cannot be determined, or if the operation effect is not good, you can try to fill the sealant around the kaolin milling equipment on-line surface flow plate, or…See More
Aug 26, 2022
gjsohcat posted a blog post

During Routine Maintenance Of Grinding Mill

When the grinding mill leaves the factory, the head shaft of the scraper mechanism and the reducer are often installed together. When installing on site, the head shaft and the reducer mesher should be disassembled first, reconnected to the scraper shaft of each slot, and the scraper shaft should be checked.If the rotation is not flexible, you can add an adjustment pad between the scraper bearing seat and the groove…See More
Aug 24, 2022
gjsohcat posted blog posts
Aug 23, 2022
gjsohcat posted a blog post

Check The Main Bearing Hydraulic Station

To check the oil quantity and cleanliness, the oil quantity and cleanliness can be checked through the oil flow indicator, the observation hole on the hollow journal bush cover, the oil level indicator in the fuel tank, etc.In addition, if the parking time is long in winter, the three-way cock at the water inlet of the main bearing can be turned to the waterproof position, and the siphon action can be used to discharge the accumulated water in the spherical tile through the water channel, so as…See More
Aug 21, 2022
gjsohcat posted a blog post

The Vertical Roller Mill Lining

Check whether the bolts between the connections are loose or abnormal, whether the mineral water supply is uniform, whether the gaskets and linings are seriously worn, and generally the wear degree of the vertical roller mill lining does not exceed 70%; Check whether the air compressor pressure is normal , Whether the operation is normal, whether the motor voltage and current are normal, whether the motor is overheated, whether the air duct leaks, etc. Check the wear of the steel balls used in…See More
Aug 18, 2022
gjsohcat posted a blog post

The Process Of Ultrafine Vertical Mill

Ultrafine vertical mill debugging In the process of debugging, the motor should be turned first, and then the motor should be idling for 6 hours, and the voltage potential should be within the designed range, so that the bearing temperature should be maintained at 40 °C up and down.During the debugging process, the load ultrafine vertical mill should also be operated to make it run for 20 hours for debugging.If the ultrafine vertical mill runs smoothly, there is no abnormal noise during…See More
Aug 17, 2022
gjsohcat posted a blog post

Adjustment Of The Calcium Carbonate Mill

If there is a large misalignment of the bolt holes, then reconstruction work must be carried out. Secondly, according to the corresponding standard requirements, the datum point and the corresponding center mark should be buried, both of which are the basic basis for the installation and adjustment of the calcium carbonate mill.In addition, before installation, the cleaning of…See More
Aug 16, 2022
gjsohcat posted blog posts
Aug 9, 2022
gjsohcat posted a blog post

The Power Of The Dolomite Powder Machine

When the dolomite powder machine is running empty, let the motor run for 2 hours under the condition of no load of the dolomite powder machine. During this period, ensure that the motor rotates in the correct direction and the accident button works normally and reliably to ensure safety.If the motor runs normally when idling, the reducer should be idling for 2 hours. Connect the…See More
Jul 28, 2022

Gjsohcat's Blog

The Capacity of Mica Powder Production

Posted on February 6, 2023 at 1:46am 0 Comments

The capacity of cement will rise for 10-15% if added with mica, and will rise for 20-30% if added mica and slag. It will also increase corrosion stability.



When producing mica powder, it can take the method of jointly grinding or separately grinding. The feeding mica fineness should be around 0.08mm (200 mesh), much smaller than other material.



Jointly grinding is to send the raw… Continue

An Overview Of Gypsum

Posted on January 30, 2023 at 8:21pm 0 Comments

Gypsum is an important renewable resource, containing phosphorus, fluorine and other magazines, the main chemical components are CaO and SO3. gypsum mainly exist in four types of crystalline needles, tabular crystals, dense crystalline, crystal nuclei form. In phosphoric acid production process, part of the phosphate rock is not decomposed, gypsum washing the filtration process is not completely and the addition of additive are all reasons of gypsum containing phosphorus, fluorine and other… Continue

1000 Mesh Quartz Stone Ultrafine Vertical Mill Operation Site

Posted on November 1, 2022 at 9:51pm 0 Comments

The main component of quartz stone is silica, which has good oxidation resistance, high temperature resistance, corrosion resistance, and stable physical and chemical properties. It is a commonly used industrial mineral raw material and has a wide range of applications. Quartz stone is generally processed into powder and used more, and quartz stone ultrafine vertical mill needs to be used.



With the development of industry, the demand for ultra-fine powder is getting higher and… Continue

Factors Affecting Ultrafine Vertical Mill Running

Posted on September 8, 2022 at 2:24am 0 Comments

the operating resistance of the ultrafine vertical mill determines the energy consumption, filtration efficiency and cleaning cycle of the dust removal system. once the operating resistance is too high, the work efficiency of the ultrafine vertical mill will be reduced, resulting in insufficient dust removal capacity, and will also affect the load of the entire system.



1. dust concentration at the entrance of the ultrafine… Continue

Comment Wall

  • No comments yet!

You need to be a member of On Feet Nation to add comments!

Join On Feet Nation

 
 
 

© 2024   Created by PH the vintage.   Powered by

Badges  |  Report an Issue  |  Terms of Service